35kw vacuum induction melting furnace adopts quartz cavity | cyky

This type of 35kw vacuum induction melting furnace adopts vertical quartz cavity, and both ends are equipped with water-cooled flanges, which can ensure that the entire cavity will not be damaged by thermal shock during operation. The furnace body flange is equipped with a vacuum interface and a protective gas interface, which can be used for vacuum smelting and atmosphere protection smelting, and can effectively ensure that the sample is not oxidized. The induction furnace adopts high-frequency power supply for heating, with fast heating speed and high energy efficiency ratio. It is mainly used for melting and processing of metal materials (such as stainless steel, nickel base alloy, copper, alloy steel, nickel cobalt alloy, rare earth neodymium iron oxide, etc.) under the condition of vacuum or protective atmosphere.

 INDUCTION MELTING FURNACE Application range

This set of equipment adopts suction casting method to cast alloy, which can effectively reduce alloy shrinkage defects, and is an ideal tool for preparing small diameter alloy rods.

vacuum induction melting furnace

35kw vacuum induction melting furnace technical Parameters

Item Detail
Supply voltage AC380/110V,50Hz
Maximum power 35kw
Maximum temperature 2000 ℃
Crucible capacity 2kg (steel liquid)
Vacuum acquisition Bipolar rotary vane vacuum pump
Limit vacuum degree ≤ 10Pa
Protective atmosphere nitrogen, argon ≤ 0.05Mpa
Dimension 660×1060×1060mm(L×W×H)
Weight 200kg

1 thought on “35kw vacuum induction melting furnace adopts quartz cavity | cyky”

Comments are closed.